TIGERTAPE™ SHORT BARB

Gryffin provides it Short Barb Razor Wire product all commercial, industrial applications including;

• Data Centres
• Defence Sites
• Correctional Facilities
• Transport
• Utility Providers
• Factories
• Warehouses
• Carpark Entrances
• Local and State Government Projects
• Critical Infrastructure

TigerTape™ Short Barb is made of continuous galvanized strip with four barbs cold clenched around a high tensile spring steel core wire. The barbs prevent any hand hold and grip onto any form of clothing. The core wire helps make the TigerTape™ difficult to cut & ensures long life.

TigerTape™ Single Is machine formed as a continuous helical coil. The individual loops are strung out like a spring & tied at regular intervals to a fence or wall. Diameters available 470 & 760mm.

TigerTape™ Concertina Is formed by clipping loops of single coil to one another at regular points. When extended this forms a cylindrical pattern & limits the extension of the coil giving integral strength & eliminating the need for support cables.

Diameters available 550, 760 & 980mm.

TigerTape™ Flat Is supplied as individual clipped loops suitable for attaching directly to fence tops parallel to the fence line. Suitable for situations where no overhang into adjoining properties or where a neat f lat appearance is required. Diameters available 470, 550 & 760mm.

APPLICATIONS

SHORT BARB TIGERTAPE™ SPECIFICATIONS

Galvanized Blade Strip

• Galvabond G2 0.55mm Thick
• Coating Class Z275
• Hardness HR30T 50-60 (typical)
• Surface Finish: Spangled
• Surface Treatment: Chromated
• Australian Standard AS 1397

Tape Configuration

• Clusters of barbs at 25mm(+/-1mm) centres
• Each barb 10mm (approx) long with needle sharp points.
• Width of barbed tape: 14mm. Hard-Drawn Galvanized Spring Steel Wire Range 2
• Standard: AS 1472/1979 • Diameter: 2.5mm (+/-0.02)
• Tensile Strength: 1730-1950 MPa
• Galvanizing: Galvanized 125g/m2 (min)
• Class WO5 AS4534-1998.

Concertina Clips

• Galvabond G2 1.6mm Thick x 9.7mm wide
• Coating Class Z275
• Hardness HR30T 50-60 (typical)
• Surface Finish: Spangled
• Surface Treatment: Chromated
• Australian Standard AS 1397

Don’t hesitate to contact Gryffin sales staff to discuss your specific application requirements.